|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Description: Standard Weight PVC Glove 60cm (SABS).
Physical Properties: A lined dip coated PVC glove that is extended with yellow PVC Coated Polyester that is attached to the cuff. All the seams are High Frequency welded.
Standards: SABS
Uses: Used when working or handling or works with chemicals.
Mechanical
Cut Suitable for Minimal Application
Abrasion Suitable for General Application
Puncture Suitable for Minimal Application
Chemical
Acids Suitable for General Application
Basis Suitable for General Application
Solvents Not Suitable
Aluminium Chloride
Plating Solutions Chrome
Citric Acid
Potassium Hydroxide (50%)
Epoxy Resin
Sodium Hydroxide (50%)Ethylene Glycol
Tannic Acid
Formic Acid
Heat
Heat Not Suitable Cold Not Suitable
Precautions:
Not suitable for: Chloroform
Ethyl Ether
Nitric Acid
Paint Remover Perchloroethylene
Trichloroethylene
Description: Plain Cuff Rubber Glove 40cm.
Physical Properties: An unsupported smooth palm rubber glove with open cuff.
Uses: For handling acids and bases.
Mechanical
Cut Not Suitable.
Abrasion Not Suitable.
Puncture Not Suitable.
Chemical
Acids Suitable for General Application
Bases Suitable for General Application
Solvents Not Suitable.
Citric Acid
Sodium Hydroxide (50%)
Freon 22
Tannic Acid
Methyl Alcohol
Propyl Alcohol
Heat
Heat Not Suitable. Cold Not Suitable.
Precautions: Not suitable for:
Acetone Freon 21 Animal Fats Gasoline Benzene Hydraulic Fluid
Chlorine (Dry) Lubricating Oils (Petroleum) Ethyl Acetate Nitric Acid Freon 11 Perchloroethylene
Description: Yellow latex Rubber Glove 27cm.
Physical Properties: A cut resistant short latex glove with canvas cuff.
Uses: For protection against cuts, abrasion and puncture. Eg In the handling of metal sheeting.
Mechanical
Cut Suitable for General application.
Abrasion Suitable for minimum application.
Puncture Suitable for minimum application.
Chemical
Acids Not Suitable.
Bases Not Suitable.
Solvents Not Suitable.
Heat
Heat Not Suitable. Cold Not Suitable.
Precautions: Not to be used for protection against chemicals.
Caution to be taken when handling sharp objects.
Description: Candy Striped Leather Glove
Physical Properties: Cow hide Leather palm glove with striped canvas backing.
Mechanical
Cut Suitable for Minimal Application
Abrasion Suitable for General Application
Puncture Suitable for General Application
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable.
Heat
Heat Suitable for Minimal Application
Cold Suitable for Minimal Application.
Chemical Application: None
Uses To be used as a general handling glove.
Precautions: Not to be used with chemicals of any sort.
Not to be used for heat resistant applications
Description: Candy Striped Pigskin Glove
Physical Properties: Pig skin Leather palm glove with striped canvas backing.
Mechanical
Cut Suitable for Minimal Application
Abrasion Suitable for General Application
Puncture Suitable for General Application
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable.
Heat
Heat Suitable for Minimal Application
Cold Suitable for Minimal Application.
Chemical Application: None
Uses To be used as a general handling glove.
Precautions: Not to be used with chemicals of any sort.
Not to be used for heat resistant applications.
Back To Gloves
Description: Crayfish Glove
Physical Properties: Polycotton knitted glove with rubber palm coating.
Standards EN388 1994
Mechanical
Abrasion EN level 4
Cut EN level 2
Tear EN level 4
Puncture EN Level 2
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable.
Heat
Heat Not Suitable
Cold Not Suitable
Uses: To be used as a general handling glove providing excellent abrasion protection and superior grip.
Precautions: Not to be used with chemicals of any sort.
Not to be used for heat resistant applications.
Back To Gloves
Description: Economy Grade Leather Glove
Description: Reinforced Leather Glove 5cm.
Physical Properties: Full leather skin type glove with elasticated wrist.
Mechanical
Cut Suitable for Minimal Application
Abrasion Suitable for General Application
Puncture Suitable for General Application
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable.
Heat
Heat Suitable for Minimal Application
Cold Suitable for Minimal Application.
Uses: To be used as a general handling glove, for Rigging, and Tig welding.
Precautions: Not to be used with chemicals of any sort.
Not to be used for heat resistant applications.
Back To Gloves
Description: Reinforced Chrome Leather Glove 5cm cuff
Physical Properties: All cow leather. Double leather thumb and palm.
Standards EN388 1994
Mechanical
Abrasion EN level 2
Cut EN level 1
Tear EN level 3
Puncture EN Level 2
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable.
Heat
Heat Not Suitable (can withstand +- 80-90deg. Contact
Heat for short periods +- 1 min)
Cold Not Suitable
Uses: To be used as a general handling glove.
Precautions: Not to be used with chemicals of any sort.
Not to be used for heat resistant applications
Description: Reinforced Chrome Leather Glove 20cm cuff
Physical Properties: All cow leather. Double leather thumb and palm.
Standards EN388 1994
Mechanical
Abrasion EN level 2
Cut EN level 1
Tear EN level 3
Puncture EN Level 2
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable.
Heat
Heat Not Suitable (can withstand +- 80-90deg. Contact
Heat for short periods +- 1 min)
Cold Not Suitable
Uses: To be used as a general handling glove.
Precautions: Not to be used with chemicals of any sort.
Not to be used for heat resistant applications.
Back To Gloves
Description: Reinforced Chrome Leather Glove 40cm cuff
Physical Properties: Full leather glove.
Mechanical
Cut Suitable for Minimal Application
Abrasion Suitable for General Application
Puncture Suitable for General Application
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable
Heat
Heat Suitable for General Application
Cold Suitable for General Application
Chemical Application: None
Uses To be used as a general handling glove for welders assistants.
Precautions: Not to be used with chemicals of any sort.
Not to be used for high heat resistant applications
Description: Lined Green Welders Glove 5cm cuff
Physical Properties: All cow leather glove with full cotton lining that can withstand heat of between 140 - 175 °C.
Standards: EN 388 1994
Mechanical
Abrasion EN Level 3
Cut EN Level 1
Tear EN Level 4
Puncture EN Level 3
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable.
Heat
Heat Suitable for General Application
Cold Suitable for General Application.
Uses To be used as a general handling welding glove.
Precautions: Not to be used with chemicals of any sort.
Back To Gloves
Description: Lined Green Welders Glove 20cm cuff
Physical Properties: All cow leather glove with full cotton lining that can withstand heat of between 140 - 175 °C.
Standards: EN 388 and 12477
Mechanical
Abrasion EN Level 3
Cut EN Level 1
Tear EN Level 4
Puncture EN Level 3
Heat
Burning behaviour EN Level 4
Contact heat EN Level 2
Convective heat EN Level 4
Molten metal drops EN Level 4
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable.
Cold Suitable for General Application.
Uses To be used as a general handling welding glove.
Precautions: Not to be used with chemicals of any sort.
Back To Gloves
R30/27PP – Master Miner Hi-Viz
Description: Heavy weight 27cm open cuff, re-inforced palm, EN approved PVC Glove
Physical Properties: A general purpose handling glove. Tough flexible rough palm high visability PVC coating will withstand abrasion in dry handling conditions. Protection levels are measured from palm area of glove. Intermediate safety category. Liquid proof but not recommended for use with chemical liquids.
Size: 9.5
Standards: EN 388 1994
Uses: A General purpose glove that is made use of when protection is required in daily handling tasks. Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the glove for its intended use.
Mechanical
Abrasion EN level 4
Cut EN level 1
Tear EN level 1
Puncture EN Level 1
Heat & Cold. Not Suitable
Maintenance: Both new and used gloves should be thoroughly inspected before use. Gloves should not be left in contaminated condition and where possible, provided no serious hazard exists, should be cleaned before removal. The gloves can be washed with mild detergent then rinsed and dried before use.
Precautions: Not suitable for chemical handling.
Description: Medium weight 30cm, double dipped, open cuff fleece lined EN approved PVC Freezer Glove
Physical Properties: A general purpose handling glove. Tough flexible smooth high visability PVC coating will withstand abrasion in most normal handling conditions. Protection levels are measured from palm area of glove. Intermediate safety category. Liquid proof but not recommended for use with chemical liquids.
Size: 9.5
Standards: EN 388 1994
Uses: General purpose glove that is made use of when protection is required in daily handling tasks, especially at low temperatures. Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the glove for its intended use.
Mechanical
Abrasion EN level 4
Cut EN level 1
Tear EN level 1
Puncture EN Level 1
Heat & Cold. Not Suitable
Maintenance: Both new and used gloves should be thoroughly inspected before use. Gloves should not be left in contaminated condition and where possible, provided no serious hazard exists, should be cleaned before removal. The gloves can be washed with mild detergent then rinsed and dried before use.
Precautions: Not suitable for chemical handling.
HV40/30M – Winter Task Hi-Viz with Microbeads
Description: Medium weight 30cm, double dipped, open cuff fleece lined EN approved PVC Freezer Glove
Physical Properties: A general purpose handling glove. Tough flexible textured high visability PVC coating will withstand abrasion in most normal handling conditions. Protection levels are measured from palm area of glove. Intermediate safety category. Liquid proof but not recommended for use with chemical liquids.
Size: 9.5
Standards: EN 388 1994
Uses: A General purpose glove that is made use of when protection is required in daily handling tasks, especially at low temperatures. Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the glove for its intended use.
Mechanical
Abrasion EN level 4
Cut EN level 1
Tear EN level 1
Puncture EN Level 1
Heat & Cold. Not Suitable
Maintenance: Both new and used gloves should be thoroughly inspected before use. Gloves should not be left in contaminated condition and where possible, provided no serious hazard exists, should be cleaned before removal. The gloves can be washed with mild detergent then rinsed and dried before use.
Precautions: Not suitable for chemical handling.
HV60/40PP – Master Miner Hi-Viz
Description: Heavy weight 40cm open cuff, re-inforced palm, EN approved PVC Glove
Physical Properties: A general purpose handling glove. Tough flexible rough palm high visability PVC coating will withstand abrasion in dry handling conditions. Protection levels are measured from palm area of glove. Intermediate safety category. Liquid proof but not recommended for use with chemical liquids.
Size: 9.5
Standards: EN 388 1994
Uses: A General purpose glove that is made use of when protection is required in daily handling tasks. Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the glove for its intended use.
Mechanical
Abrasion EN level 4
Cut EN level 1
Tear EN level 1
Puncture EN Level 1
Heat & Cold. Not Suitable
Maintenance: Both new and used gloves should be thoroughly inspected before use. Gloves should not be left in contaminated condition and where possible, provided no serious hazard exists, should be cleaned before removal. The gloves can be washed with mild detergent then rinsed and dried before use.
Precautions: Not suitable for chemical handling
Description: Nitrile / Latex Glove 30cm.
Physical Properties: A Nitrile glove that offers good protection against Acids, Bases, and Solvents.
Standards: CE
Uses: For handling acids and bases with a minimum protection against cut, abrasion, and puncture.
Mechanical
Cut Suitable for Minimal Application
Abrasion Suitable for Minimal Application
Puncture Suitable for Minimal Application
Chemical
Acids Suitable for General Application
Bases Suitable for General Application
Solvents Suitable for General Application
Heat
Heat Not Suitable. Cold Not Suitable.
Precautions: Suitable for most acids, bases, and solvents, caution must be taken on chemicals with high concentrations. Specific permeation data should be sought before use.
Caution when using: Chloroform - 4 minutes, Dichloroethane (Not suitable) Freon 21 & 22 (Not Suitable), Trichloroethylene - 8 minutes.
Description: Nomex Fibre Glove 40cm long.
Physical Properties: A High Heat resistant glove made from Nomex fibre that is fully lined. Withstands +-450deg.
Contact heat for short periods.
Uses: For handling materials direct from hot ovens.
Curling and vulcanising processes.
Welding and burning operations.
Protection from sparks and metal splash.
For use in cold storage and steam operations.
Food processing and baking.
Mechanical
Cut Not Suitable.
Abrasion Suitable for Minimal Application
Puncture Suitable for Minimal Application
Heat Heat Suitable for heavy application.
Cold Suitable for general application.
Precautions: Not to be used where high risk of cut or puncture exist. To be used in conjunction with inner cut resistant glove.
Description: 20cm Canvas Cuff Medium Weight Loop Pile Normac Glove
Physical Properties: Cut Resistant, Abrasion Resistant, Heat & Cold Resistant, Flexible, Non Slip
Mechanical
Cut Suitable for General Application
Abrasion Suitable for General Application
Puncture Suitable for Minimal Application
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable.
Heat
Heat Suitable for Application (200 Degrees)
Cold Suitable for General Application
Uses Gloves are manufactured from a special type of cotton yarn which is knitted into thick, close, looppile fabric which cushions and protects hands.
Precautions: Ensure that the glove is used in the correct application, shown above
Description: Polkadot Glove
Physical Properties: Cotton glove with impregnated rubber studs for added grip.
Mechanical
Cut Suitable for Minimal Application
Abrasion Suitable for General Application
Puncture Suitable for Minimal Application
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable
Heat
Heat Suitable for Minimal Application
Cold Suitable for Minimal Application.
Uses: General handling glove where grip is required.
Precautions: Do not use when risk of cut or puncture are present.
Do not use for chemical handling.
Description: Lined welders heat resistant glove 30cm
Physical Properties: Red all cow leather glove with double apron, cotton and foam lining and Kevlar yarn.
Can withstand contact heat of up to 500 °C.
Standards: EN 407
Mechanical
Abrasion EN Level 2
Tear EN Level 4
Heat
Burning behaviour EN Level 4
Contact heat EN Level 4
Convective heat EN Level 4
Molten metal drops EN Level 4
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable.
Cold Suitable for General Application.
Uses High heat welding and furnace work.
Precautions: Not to be used with chemicals of any sort.
Back To Gloves
Description: Knitwrist Cotton Work Glove
Physical Properties: Cotton glove for Light handling.
Standards: None
Uses: Used as a light general handling glove or as an inner used in conjunction with another glove.
Precautions: Use only for general handling / as an inner.
Not to be used for Chemicals, heat, cold or cut resistant.
Description: Medium weight Knit wrist EN approved PVC Glove
Physical Properties: A general purpose handling glove. Tough flexible smooth PVC coating will withstand abrasion in dry handling conditions. Protection levels are measured from palm area of glove. Intermediate safety category. Liquid proof but not recommended for use with chemical liquids.
Size: 9.5
Standards: EN 388 1994
Uses: A General purpose glove that is made use of when protection is required in daily handling tasks. Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the glove for its intended use.
Mechanical
Abrasion EN level 4
Cut EN level 1
Tear EN level 1
Puncture EN Level 1
Heat & Cold. Not Suitable
Maintenance: Both new and used gloves should be thoroughly inspected before use. Gloves should not be left in contaminated condition and where possible, provided no serious hazard exists, should be cleaned before removal. The gloves can be washed with mild detergent then rinsed and dried before use.
Precautions: Not suitable for chemical handling.
Description: Heavy weight Knit wrist EN approved PVC Glove
Physical Properties: A general purpose handling glove. Tough flexible rough palm PVC coating will withstand abrasion in dry handling conditions. Protection levels are measured from palm area of glove. Intermediate safety category. Liquid proof but not recommended for use with chemical liquids.
Size: 9.5
Standards: EN 388 1994
Uses: A General purpose glove that is made use of when protection is required in daily handling tasks. Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the glove for its intended use.
Mechanical
Abrasion EN level 4
Cut EN level 1
Tear EN level 1
Puncture EN Level 1
Heat & Cold. Not Suitable
Maintenance: Both new and used gloves should be thoroughly inspected before use. Gloves should not be left in contaminated condition and where possible, provided no serious hazard exists, should be cleaned before removal. The gloves can be washed with mild detergent then rinsed and dried before use.
Precautions: Not suitable for chemical handling.
Description: Medium weight 27cm open cuff EN approved PVC Glove
Physical Properties: A general purpose handling glove. Tough flexible smooth PVC coating will withstand abrasion in dry handling conditions. Protection levels are measured from palm area of glove. Intermediate safety category. Liquid proof but not recommended for use with chemical liquids.
Size: 9.5
Standards: EN 388 1994
Uses: A General purpose glove that is made use of when protection is required in daily handling tasks. Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the glove for its intended use.
Mechanical
Abrasion EN level 4
Cut EN level 1
Tear EN level 1
Puncture EN Level 1
Heat & Cold. Not Suitable
Maintenance: Both new and used gloves should be thoroughly inspected before use. Gloves should not be left in contaminated condition and where possible, provided no serious hazard exists, should be cleaned before removal. The gloves can be washed with mild detergent then rinsed and dried before use.
Precautions: Not suitable for chemical handling.
Description: Medium weight 27cm open cuff EN approved PVC Glove
Physical Properties: A general purpose handling glove. Tough flexible smooth PVC coating will withstand abrasion in dry handling conditions. Protection levels are measured from palm area of glove. Intermediate safety category. Liquid proof but not recommended for use with chemical liquids.
Size: 9.5
Standards: EN 388 1994
Uses: A General purpose glove that is made use of when protection is required in daily handling tasks. Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the glove for its intended use.
Mechanical
Abrasion EN level 4
Cut EN level 1
Tear EN level 1
Puncture EN Level 1
Heat & Cold. Not Suitable
Maintenance: Both new and used gloves should be thoroughly inspected before use. Gloves should not be left in contaminated condition and where possible, provided no serious hazard exists, should be cleaned before removal. The gloves can be washed with mild detergent then rinsed and dried before use.
Precautions: Not suitable for chemical handling.
Description: Medium weight 40cm Open Cuff EN approved PVC Glove
Physical Properties: A general purpose handling glove. Tough flexible smooth PVC coating will withstand abrasion in dry handling conditions. Open cuff. Protection levels are measured from palm area of glove. Intermediate safety category. Liquid proof but not recommended for use with liquid chemicals.
Size: 9.5
Standards: EN 388 1994
Uses: A General purpose glove that is made use of when protection is required in daily handling tasks. Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the glove for its intended use.
Mechanical
Abrasion EN level 4
Cut EN level 1
Tear EN level 1
Puncture EN Level 1
Heat & Cold. Not Suitable
Maintenance: Both new and used gloves should be thoroughly inspected before use. Gloves should not be left in contaminated condition and where possible, provided no serious hazard exists, should be cleaned before removal. The gloves can be washed with mild detergent then rinsed and dried before use.
Precautions: Not suitable for chemical handling.
Description: Medium weight 40cm Open Cuff EN approved PVC Glove
Physical Properties: A general purpose handling glove. Tough flexible smooth PVC coating will withstand abrasion in dry handling conditions. Open cuff. Protection levels are measured from palm area of glove. Intermediate safety category. Liquid proof but not recommended for use with liquid chemicals.
Size: 9.5
Standards: EN 388 1994
Uses: A General purpose glove that is made use of when protection is required in daily handling tasks. Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the glove for its intended use.
Mechanical
Abrasion EN level 4
Cut EN level 1
Tear EN level 1
Puncture EN Level 1
Heat & Cold. Not Suitable
Maintenance: Both new and used gloves should be thoroughly inspected before use. Gloves should not be left in contaminated condition and where possible, provided no serious hazard exists, should be cleaned before removal. The gloves can be washed with mild detergent then rinsed and dried before use.
Precautions: Not suitable for chemical handling.
Description: Natural Latex glove with flock lining.
Physical Properties: Yellow Cotton flock lined glove with extra long fluted cuff for added protection. Curved fingers, contour palm designed for excellent fit, honey comb design for increased grip.
Uses: Chemical handling and processing, food processing and preparation, janitorial.
Mechanical
Cut Suitable for Minimal Application
Abrasion Suitable for Minimal Application
Puncture Suitable for Minimal Application
Chemical
Acids Suitable for General Application
Bases Suitable for General Application
Solvents Suitable for General Application
Heat Not Suitable. Cold Not Suitable.
Precautions: Suitable for most low concentration acids, bases, and solvents, caution must be taken on chemicals with high concentrations. Specific permeation data should be sought before use.
Description: Leather Glove
Physical Properties: All pig skin leather executive type glove with elasticated wrist.
Mechanical
Abrasion EN Level 1
Cut EN Level 1
Tear EN Level 2
Puncture EN Level 1
Chemical
Acids Not Suitable
Bases Not Suitable
Solvents Not Suitable.
Heat
Heat Suitable for Minimal Application
Cold Suitable for Minimal Application.
Uses: To be used as a general handling glove, for Rigging and Tig welding.
Precautions: Not to be used with chemicals of any sort.
Not to be used for heat resistant applications.
Back To Gloves
